Refleks stove regulator 252 AY 3-14

Reflex controls are currently very high-quality controls manufactured by the Swiss company Toby.

The regulators have overheat protection against excessive heating; the regulator cuts off the fuel supply at 100 degrees Celsius.

The copper pipes coming to the regulator are connected with bead connectors, bead connectors are included with the regulator.

The regulator fits an 8mm copper pipe, the purpose of the regulator is to adjust the fuel flow to obtain the desired heat output.

The regulator is very sensitive to various impurities, so use clean fuel, Neste MY is recommended . Also pay attention to the frost resistance of the fuel.

The regulator also functions as a safety valve in the stove.

All different controllers have their own flow values ​​set at the factory, and these cannot be changed yourself.

The maximum and minimum feed capacity is marked on the regulator, in cc/min.
The maximum and minimum for different models are as follows:

• Model 62, 66, 71 and 70 = 2.0 - 6 cm3 / min.
• Model 60, 61 and 64 = 3.0 - 14 cm3 / min.
• Model 67 MS = 5.0 - 17 cm3 / min.
• Model 67 MV = 5.0 - 20 cm3 / min.
• Model 2000K and 2000KV = 3.5 - 9 cc/min.